| Name component | Производитель | Заявка |
|---|
| MAX197AEWI | MAXIMIC | Multi-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface |
| MAX6318MHUK33BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| DG307CWE | MAXIMIC | CMOS dual and quad analog switch. |
| MAX6309UK37D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.608(min),3.793(max) Nominal timeout period 140ms. |
| IH5050MJE | MAXIMIC | CMOS analog switch. |
| MAX500AEJE | MAXIMIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-1. |
| DG528C/D | MAXIMIC | 8-channel latchable multiplexer |
| MAX6354MSUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset 3V. |
| ICL7631BCPE | MAXIMIC | Triple operational amplifier, 5mV |
| MX7576KP | MAXIMIC | CMOS, microprocessor-compatible, fast conversion time 10 microsec, 8-bit ADC. INL +-1/2 LSB. |
| MXD1013UA200 | MAXIMIC | 3-in-1 silicon delay line. Output delay 200ns. |
| MAX6316MUK28BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX6318MHUK42AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| ICL7107CQH | MAXIMIC | 3 1/2 digit a/d converter |
| MAX6336US16D3-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 1.6V, reset timeout(min) 100ms. Standard version |
| MAX6380XR35-T | MAXIMIC | Ultra-low-power voltage detector, 3.5V |
| MAX1240BCSA | MAXIMIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1 |
| MAX6318MHUK34DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6503CMP015-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +15. |
| MAX6318LHUK50BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX8885EUK30 | MAXIMIC | 150mA, low-dropout, linear regulator with power-OK output. Preset output voltage 3.0V. |
| REF02HZ | MAXIMIC | +5V precisioon voltage reference. Max TEMPCO 25ppm/degC. Initial error +-25mV |
| MAX4514EPA | MAXIMIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally open (NO), +2V to +12V single-supply operation. |
| MAX653CSA | MAXIMIC | 3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX6379UR37-T | MAXIMIC | Ultra-low-power voltage detector, 3.7V |
| DG419DY | MAXIMIC | Improved, SPDT (with one NO and one NC) analog switch |
| MAX186ACWP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX690MJA | MAXIMIC | Microprocessor supervisory circuit. |
| MAX6317HUK28CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX199ACAI | MAXIMIC | Multi-range (+-4V, +-2V, +4V, +2V), +5V supply, 12-bit DAS with 8+4 bus interface |
