| Name component | Производитель | Заявка |
|---|
| MAX900BEPP | MAXIMIC | High-speed, low-power voltage comparator |
| MAX729ECK | MAXIMIC | 3V fixed output,2A step-down, PWM, switch-mode DC-DC regulator. |
| MAX186AEPP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX398ESE | MAXIMIC | Precision, 8-channel, low-voltage, CMOS analo0g multiplexer. |
| MAX622C/D | MAXIMIC | High-side power supply. |
| MAX6310UK39D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.803(min),3.998(max). Nominal timeout period 1ms. |
| MAX6194BESA | MAXIMIC | Precision, micropower, low-dropout voltage reference. Output voltage 4.500V, initial accuracy +-5, temperature coefficient <10ppm. |
| MAX642BEJA | MAXIMIC | +12V fixed output, 10W CMOS step-up switching regulator. 10% output accuracy |
| MAX6321HPUK47CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX4559EPE | MAXIMIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX6316MUK32DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6315US31D1-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.08V. Reset timeout period(min) 1ms. |
| MAX274AMRG | MAXIMIC | 8th-order continuous-time active filter |
| MAX199ACNI | MAXIMIC | Multi-range (+-4V, +-2V, +4V, +2V), +5V supply, 12-bit DAS with 8+4 bus interface |
| MAX6318MHUK27AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX6316LUK45CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 140ms, typ watchdog timeout 26.6sec |
| MAX6501CMP115-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +115. |
| MAX6322HPUK48C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 140ms |
| ICL7614ACSA | MAXIMIC | Single operational amplifier, 2mV |
| MAX6314US37D4-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.70V. Reset timeout period(min) 1120ms. |
| MAX668EUB | MAXIMIC | 1.8V to 28V input, RWM step-up controlleer |
| MAX6316LUK39CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX6309UK41D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.998(min),4.203(max) Nominal timeout period 20ms. |
| MAX392ESE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX435C/D | MAXIMIC | Wideband transconductance amplifier. 275MHz bandwidth, 450microA shutdown capability. |
| MAX906EPE | MAXIMIC | Dual, high-speed, positive edge-triggered, ECL-compatioble voltage comparator. |
| MXD1013SA045 | MAXIMIC | 3-in-1 silicon delay line. Output delay 45ns. |
| MAX6316MUK45CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX3317ECUP | MAXIMIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX4429EPA | MAXIMIC | High-speed, 6A single MOSFET driver. 4.5V t0 18V supply range. |
